Welcome to Fushun Research Institute of Petroleum and Petrochemicals,SINOPEC.

> Home        > Chinese

 

   

    

    

     

  

  

  
 
Process       

 Products 

   Services

 

Technology for clean fuels production--diesel <<

High Pressure Hydrocracking Technology   

  Bellowing list the product slates and product qualities of high-pressure hydrocracking of several typical feeds. The data illustrate that whether using single-stage in series or single-stage process, or using full-recycle or once-through operation mode, the produced diesels all well meet the requirements of EURO-III and EURO-VI. In addition, the process can also produce good quality reformer feeds and 3# jet fuels. When once-through operation mode is selected, the unconverted oil is high quality alternated feed of steam cracker for ethylene production. From this, we can see that high pressure hydrocracking is not only the sole technology for producing high grade jet fuels from poor quality heavy oil, but also the sole technology for producing EURO-III and EURO-VI diesel from poor quality heavy oil. 

Product yields and qualities of high-pressure hydrocracking

Feed

Saudi light
VGO
Saudi medium VGO Iranian light VGO Iranian light VGO

Boiling range

319531 314527 329543 321528

Process

Single-stage in series Single-stage

Operation mode

Full recycle once through Full recycle once through Full recycle once through Full recycle once through

Product qualities

    

Heavy naphtha, yield m%

16.64

12.96

18.43

11.36

17.46

11.49

10.98

7.76

Aromatics potential m%

57.1

64.2

57.5

64.7

58.3

64.7

52.4

60.0

Jet fuels, yield m%

37.84

35.45

41.84

29.97

42.7

30.16

29.87

21.76

Smoke point/mm

29

27

29

28

28

27

28

26

Aromatics v%

2.5

4.2

5.9

9.8

4.0

6.8

6.5

7.1

Diesel,
yield m%

31.43

11.76

24.63

19.65

25.95

20.73

48.96

39.86

S/N μg/g

<5/<1

<5/<1

<5/<1

<5/<1

<5/<1

<5/<1

<5/<1

<5/<1

Density
g/cm3

0.8095

0.8238

0.8126

0.8299

0.8146

0.8280

0.8152

0.8206

Cetane number

70

64

68.8

59.2

70.5

59.2

62.0

59.2

Aromatics m%

7.3

11.8

12.3

14.1

13.3

14.7

4.5

5.9

Mid-barrel distillates, yield m%

69.27

47.21

66.47

49.62

68.65

50.89

78.83

61.62

Unconverted oil, yield m%

-

31.58

-

30.84

-

30.05

-

24.04

BMCI

-

9.8

-

12.0

-

13.0

-

10.1

Other operating conditions: Pressure-15.7MPa, 370 Per pass conversion-70%

   

  

Copyright © 2004-2005 Fushun Research Institute of Petroleum and Petrochmicals,SINOPEC.